Patel Hydraulics

• Recommended For High Pressure hose for plaster spraying/Hose for conveying cement mixture for plastering applications
• Tube Highly abrasion resistant, natural rubber [Black]
• Reinforcement Two braid of high tenacity synthetic textile yarn.
• Cover Abrasion resistant & resilient natural rubber [Black]
• Temperature Range -30 Degree C to +80 Degree C

??

??

• All ranges of BSP fittings available 

• Recommended For General industrial applications such as oil, alcohols. aqueous solutions, hydraulic fluids, acids, detergents and chemicals. Tube NBR (Nitrite)
• Reinforcement One or Two fiber braids.
• Cover NBR (Nitrite)/PVC
• Temperature Range -40 Degree C to +95 DegreeC

??

• General industrial applications such as oil, alcohols, Aquerous solutions, hydraulic fluids, acids, detergents and chemicals.

• Petroleum-base hydraulic oils, water, glycol antifreeze solutions, hot lubricating oils, and air. NOTE Lock-On hose and couplings are not recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Not recommended for gasoline or diesel fuels.
• Tube Type C [Nitrile], Black
• Reinforcement Braided, high tensile synthetic textile cord.
• Cover Type A (Neoprene). Black TypeC, (Modified Nitrile). Blue, red, yellow, green or grey. Temperature Range -40 DegreeC to +100 DegreeC

• Recommended For Pneumatic services in heavy duty drill rig compressor upto 1100 CFM capacity in ground drilling, quarries, construction and general industry.
• Tube Specially developed blend of synthetic rubber (Black), resistant to high temperature of air & oil mist
• Reinforcement Two braid of high tensile steel wire.
• Cover Highly abrasion resistance &flame resistance Modified CR (Black)
• Temperature Range -40 Degree C to +135 Degree C

??

??

• Recommended For All operations associated with ground fueling & de-fuelling of aircrafts. Suitable for applications with petroleum fuels having an aromatic hydrocarbon content not exceeding 30% by volume.
• Tube Black, Resistant to aviation fuel, Nitrile Rubber
• Reinforcement 2 braid of High-tenacity synthetic yarn
• Cover Black anti-static NBR/PVC Rubber Temperature Range -30 Degree C to +65 Degree C

??

• Recommended For Most suitable for highly abrasive particles like Coke particles, Gravel, sand or a mixture of all with air. Out performs any hose in such severe working conditions. Especially recommended for extreme abrasive conditions where normal sand blast hoses are not able to perform. Special Features A wire braid version is available in 1-1/2" size addition to extra thick tube to make it suitable for lasting for minimum of 70 heats in steel melting furnaces. Dimensions of textile & wire braid hoses are same as given.
• Tube Extremely high resistant NR/SBR (Black)/Antistactic modified NR.
• Reinforcement Single braid, high tenacity synthetic yarn.
• Cover Excellent abrasion resistant NR/SBR (Black)
• Temperature Range -30 Degree C to +70 Degree C

• To handle the pumping of concrete with high head pressure from concrete boom truck and as a discharge hose on the delivery end of high pressure concrete pumps. Specially designed high abrasion resistant tube is most suited for handling wet concrete, plaster or gout material.

• Specially compounded abrasion resistant & resilient natural rubber black.

• Two layers of high tensile steel wire.

• Specially compounded abrasion resistant natural rubber black.

• -40 DegreeC to +70 DegreeC

??

??

• Recommended For For light weight/water hose for industrial application where non-conductive hose is required.
• Tube Grey oil resistant synthetic rubber (Nitrite]
• Reinforcement One braid of high tenacity synthetic yarn. Cover Red, Modified synthetic rubber (Nitrile/PVC] Temperature Range -40 DegreeC to +100 Degree C

??

• Recommended For Conveying dilute chemicals e.g. Alums, Caustic Soda. Lime solutions, Dilute Hydrochloric Acid. Dilute Sulphuric acid, Methyl Alcohol, Ethyl alcohol, Butyl alcohol, Isobutanol etc. (Ref. Gates Chemical Resistance Table or Gates representative for further information.
• Tube Specially compounded EPDM, black.
• Reinforcement High tenacity synthetic yam.
• Cover Specially compounded EPDM, black.
• Temperature Range -40 Degree C to + 100 Degree C

??

• Recommended For Heavy duty, high pressure use on industrial construction and pneumatic mining applications, requinng an extra heavy duty hose with an oil resistant tube and abrasion resistant cover.
• Tube Specially compounded Nitrile Rubber, Black
• Reinforcement Single braid of high tensile steel wire.
• Cover Option 1 Specially compounded highly abrasion resistant natural rubber, black, Option 2 Highly abrasion resistant modified Nitrile rubber. yellow All sizes with perforated cover. Yellow cover MSHA IC 11 C. Flame resistant
• Temperature Range -30 Degree C to +82 Degree C

• Recommended For Heavy duty, high pressure use on industrial construction and pneumatic mining applications, requiring an extra heavy duty hose with an oil resistant tube and abrasion resistant cover.
• Tube Specially compounded Nitrile Rubber, Black
• Reinforcement Single braid of high tenacity synthetic yarn.
• Cover Specially compounded high abrasion resistant Nitrile rubber for size 12.5 mm & 20.0 mm
• Black High tension resistant modified natural rubber for size 25.0 mm.
• Temperature Range -30 Degree C to +82 DegreeC

??

??

• Recommended For Excellent steam handling. The hose features a specially compounded, perforated synthetic rubber cover intended for use where the hose is exposed to all types of steam-saturated and superheated up to 150 psi and 195 degree centigrade. Note Do not alternate change between steam and water.
• Tube EPDM, black
• Reinforcement Single braid of high tensile brass coated steel wire for size 12.7 mm
• Cover EPDM, black. All sizes are perforated.
• Temperature Range -40 Degree C to +195 Degree C

??

• Recommended For Heavy duty industrial uses including heat control, melting of substance such as wax and glue, thawing. cleaning and steam transfer applications. It will handle all types steam saturated and superheated up to 185 psi and +232 degree centigrade. Note Do not alternate change between steam and water.
• Tube EPDM, black
• Reinforcement Single braid of high tensile brass coated steel wire for size 12.7 mm Two braids of high tensile brass coated steel wire for size 20.0 mm to 50.0 mm
• Cover EPDM, black. All sizes are perforated.
• Temperature Range -40 Degree C to +232 Degree C

??

??

• Ultra high pressure water blasting applications, not to use for Hydraulic application
• Tube Black, oil resistant, synthetic rubber (Nitrile - type C),
• Reinforcement Four spirals of very high tensile steel wire.
• Cover Black, oil resistant, synthetic rubber (Neoprene - type A) Impulse tested for more than 25,000 cycles at 15,000 psi pressure to ensure good service life
• Temperature Range -20 Degree C to +70 Degree C

• One or multiple layers of textile reinforced
• Nitrile rubber cover - green
• -40 to 100° c approx

Additional Information:

• Delivery Time: 1 week

• Recommended For CNG applications for use in CNG kits in automobiles upto 2.1 Mpa- (cars LCV, HCV etc.)
• Tube Specially compounded oil resistant Nitrile Rubber, Black
• Reinforcement High tenacity synthetic yarn.
• Cover Specially compounded oil abrasion resistant Nitrile rubber, Black
• Temperature Range -40 DegreeC to +100 DegreeC

??

• Recommended For All car washing and pressure washer application in Garages, Service Stations and Industries.
• Tube Modified Nitrile Rubber. Black
• Reinforcement Single braid of high tenacity synthetic yarn.
• Cover Modified Nitrile rubber, black.
• Temperature Range -30 Degree C to +82 DegreeC

• Recommended For Sand & Shot blasting applications, where abrasive materials are carried at high velocity and at 10 Bar.
• Tube Highly abrasion resistant, natural rubber [Black]
• Reinforcement Two braids of high tenacity synthetic textile yarn. Twin copper wires ensure reliable conductivity.
• Cover Abrasion resistant natural rubber- black.
• Temperature Range -30 Degree C to +70 Degree C

• Recommended For Highly abrasive material used in Sand Blasting applications including River Sand Garnets, Copper Slag, Coal Particles, Corundum, Cast Steel, Grit Glass etc. Specially designed for superior performance-longer life due to very low tube wear.
• Tube Excellent abrasion resistant, Anti-static, Modified NR, Black
• Reinforcement High-tenacity synthetic yarn. 3/4",1" Single yarn braid, 1-1/4" 1-1/2" Double yarn braid, 2 braid of high tenacity
• Temperature Range -40 Degree C to +75 Degree C

• All types of pneumatic tools in industries, compressed air applications and construction industry.
• Tube Modified Nitrile Rubber, Black,
• Reinforcement Single braid of high tenacity synthetic yarn for size 6.3 mm to 25 mm, single braid of high tensile brass coated Steel wire for size 31.5mm to 50.0mm,
• Cover Specially compounded high abrasion resistant Nitnle rubber for size 6.3mm to 20 mm.

Specifications

• Recommended For Ultra high pressure water blasting applications, not to use for Hydraulic application
• Tube Black, oil resistant, synthetic rubber (Nitrile - type C).
• Reinforcement Four spirals of very high tensile steel wire.
• Cover Black, oil resistant, synthetic rubber [Neoprene - type A) Impulse tested for more than 25,000 cycles at 15,000 psi pressure to ensure good service life
• Temperature Range -20 DegreeC to +70 Degree C

??

• Recommended For Ultra high pressure water blasting applications, not to use for Hydraulic application
• Tube Black, oil resistant, synthetic rubber (Nitrile - type C).
• Reinforcement Four spirals of very high tensile steel wire.
• Cover Black, oil resistant, synthetic rubber [Neoprene - type A) Impulse tested for more than 25,000 cycles at 15,000 psi pressure to ensure good service life
• Temperature Range -20 DegreeC to +70 Degree C

??

• Recommended For Dispensing all types of petrol and diesel fuels for service station pumps. Electrical conductivity having two number braided copper flex wires laid spirally in opposite direction for electrical conductivity.
• Tube Specially compounded nitrile rubber black. Resistant to highly aromatic gasoline. Reinforcement Two Braid of high tenacity synthetic yam. Copper wire ensures reliable conductivity.
• Cover Modified Nitrite rubber, black.
• Temperature Range -30 DegreeCto +49 DegreeC

??

??

• Exceeds IS 1677 Type 4
• Recommended For Very high pressure spraying of water based pesticides and chemicals in agriculture and forestry. Oil resistant tube ensures long life.
• Tube Modified Nitrile Rubber, Black
• Reinforcement Single braid of high tenacity synthetic yarn.
• Cover Modified Nitrite rubber, black.
• Temperature Range -30 Degree C to +82 Degree C

• Recommended For Sand, shot blasting applications and where abrasive material are carried at high velocity. Electrical Conductivity having two numbers braided copper flex wires laid spirally in opposite direction for electrical conductivity.
• Tube Specially compounded abrasion resistant & resilient natural rubber, Black
• Reinforcement High tenacity synthetic yam. Twin copper wires ensure reliable conductivity.
• Cover Specially compounded abrasion resistant natural rubber, Black
• Temperature Range -40 DegreeC to +70 DegreeC

Additional Information:

• Delivery Time: 1-7 days
• Packaging Details: reels